O-Rings
Additional Information
There are several different standards to choose from when it comes to O-ring dimensions. The most popular in the United States is the AS568 standard for O-ring sizes and tolerances. Maintained by the Society of Automotive Engineers, this standard allows the user to choose from five different cross-sections with inside diameters ranging from 1/32" to 26". Tube fitting boss seals are included in AS568 as 900 series O-ring sizes, and are intended for use in MS33649 (now superseded by SAE-AS5202) straight thread tube fitings. RT/Dygert also offers a wide array of metric sizes, in both standard and non-standard dimensions. As a subset of the metric sizes offered, we also stock many Japanese Industrial Standard (JIS B2401) sizes. If an O-ring with special size or fluid resistance is required, RT/Dygert can provide custom O-rings, specially made to your demanding requirements.
SIZES
| Dimensions in Inches | Nominal Size (Reference Only) | |||||||
| ID | AS568A | I.D. | ± | C/S | Vol (in3) | I.D. | O.D. | C/S |
| 1313 | 201 | 0.171 | .005 | .139 ± .004 | .0148 | 3/16 | 7/16 | 1/8 |
| 1314 | 202 | 0.234 | .005 | .139 ± .004 | .0178 | 1/4 | 1/2 | 1/8 |
| 1315 | 203 | 0.296 | .005 | .139 ± .004 | .0207 | 5/16 | 9/16 | 1/8 |
| 1316 | 204 | 0.359 | .005 | .139 ± .004 | .0237 | 3/8 | 5/8 | 1/8 |
| 1317 | 205 | 0.421 | .005 | .139 ± .004 | .0267 | 7/16 | 11/16 | 1/8 |
| 1318 | 206 | 0.484 | .005 | .139 ± .004 | .0297 | 1/2 | 3/4 | 1/8 |
| 1319 | 207 | 0.546 | .007 | .139 ± .004 | .0327 | 9/16 | 13/16 | 1/8 |
| 1320 | 208 | 0.609 | .009 | .139 ± .004 | .0357 | 5/8 | 7/8 | 1/8 |
| 1321 | 209 | 0.671 | .009 | .139 ± .004 | .0386 | 11/16 | 15/16 | 1/8 |
| 1322 | 210 | 0.734 | .010 | .139 ± .004 | .0416 | 3/4 | 1 | 1/8 |
| 1323 | 211 | 0.796 | .010 | .139 ± .004 | .0446 | 13/16 | 1-1/16 | 1/8 |
| 1324 | 212 | 0.859 | .010 | .139 ± .004 | .0476 | 7/8 | 1-1/8 | 1/8 |
| 1325 | 213 | 0.921 | .010 | .139 ± .004 | .0505 | 15/16 | 1-3/16 | 1/8 |
| 1326 | 214 | 0.984 | .010 | .139 ± .004 | .0535 | 1 | 1-1/4 | 1/8 |
| 1327 | 215 | 1.046 | .010 | .139 ± .004 | .0565 | 1-1/16 | 1-5/16 | 1/8 |
| 1328 | 216 | 1.109 | .012 | .139 ± .004 | .0595 | 1-1/8 | 1-3/8 | 1/8 |
| 1329 | 217 | 1.171 | .012 | .139 ± .004 | .0624 | 1-3/16 | 1-7/16 | 1/8 |
| 1330 | 218 | 1.234 | .012 | .139 ± .004 | .0656 | 1-1/4 | 1-1/2 | 1/8 |
| 1331 | 219 | 1.296 | .012 | .139 ± .004 | .0684 | 1-5/16 | 1-9/16 | 1/8 |
| 1332 | 220 | 1.359 | .012 | .139 ± .004 | .0714 | 1-3/8 | 1-5/8 | 1/8 |
| 1333 | 221 | 1.421 | .012 | .139 ± .004 | .0744 | 1-7/16 | 1-11/16 | 1/8 |
| 1334 | 222 | 1.484 | .015 | .139 ± .004 | .0774 | 1-1/2 | 1-3/4 | 1/8 |
| 1335 | 223 | 1.609 | .015 | .139 ± .004 | .0833 | 1-5/8 | 1-7/8 | 1/8 |
| 1336 | 224 | 1.734 | .015 | .139 ± .004 | .0893 | 1-3/4 | 2 | 1/8 |
| 1337 | 225 | 1.859 | .018 | .139 ± .004 | .0952 | 1-7/8 | 2-1/8 | 1/8 |
| 1338 | 226 | 1.984 | .018 | .139 ± .004 | .1012 | 2 | 2-1/4 | 1/8 |
| 1339 | 227 | 2.109 | .018 | .139 ± .004 | .1072 | 2-1/8 | 2-3/8 | 1/8 |
| 1340 | 228 | 2.234 | .020 | .139 ± .004 | .1131 | 2-1/4 | 2-1/2 | 1/8 |
| 1341 | 229 | 2.359 | .020 | .139 ± .004 | .1191 | 2-3/8 | 2-5/8 | 1/8 |
| 1342 | 230 | 2.484 | .020 | .139 ± .004 | .1250 | 2-1/2 | 2-3/4 | 1/8 |
| 1343 | 231 | 2.609 | .020 | .139 ± .004 | .1310 | 2-5/8 | 2-7/8 | 1/8 |
| 1344 | 232 | 2.734 | .024 | .139 ± .004 | .1370 | 2-3/4 | 3 | 1/8 |
| 1345 | 233 | 2.859 | .024 | .139 ± .004 | .1429 | 2-7/8 | 3-1/8 | 1/8 |
| 1346 | 234 | 2.984 | .024 | .139 ± .004 | .1489 | 3 | 3-1/4 | 1/8 |
| 1347 | 235 | 3.109 | .024 | .139 ± .004 | .1548 | 3-1/8 | 3-3/8 | 1/8 |
| 1348 | 236 | 3.234 | .024 | .139 ± .004 | .1608 | 3-1/4 | 3-1/2 | 1/8 |
| 1349 | 237 | 3.359 | .024 | .139 ± .004 | .1668 | 3-3/8 | 3-5/8 | 1/8 |
| 1350 | 238 | 3.484 | .024 | .139 ± .004 | .1727 | 3-1/2 | 3-3/4 | 1/8 |
| 1351 | 239 | 3.609 | .028 | .139 ± .004 | .1787 | 3-5/8 | 3-7/8 | 1/8 |
| 1352 | 240 | 3.734 | .028 | .139 ± .004 | .1846 | 3-3/4 | 4 | 1/8 |
| 1353 | 241 | 3.859 | .028 | .139 ± .004 | .1906 | 3-7/8 | 4-1/8 | 1/8 |
| 1354 | 242 | 3.984 | .028 | .139 ± .004 | .1966 | 4 | 4-1/4 | 1/8 |
| 1355 | 243 | 4.109 | .028 | .139 ± .004 | .2025 | 4-1/8 | 4-3/8 | 1/8 |
| 1356 | 244 | 4.234 | .030 | .139 ± .004 | .2085 | 4-1/4 | 4-1/2 | 1/8 |
| 1357 | 245 | 4.359 | .030 | .139 ± .004 | .2144 | 4-3/8 | 4-5/8 | 1/8 |
| 1358 | 246 | 4.484 | .030 | .139 ± .004 | .2204 | 4-1/2 | 4-3/4 | 1/8 |
| 1359 | 247 | 4.609 | .030 | .139 ± .004 | .2264 | 4-5/8 | 4-7/8 | 1/8 |
| 1360 | 248 | 4.734 | .030 | .139 ± .004 | .2323 | 4-3/4 | 5 | 1/8 |
| 1361 | 249 | 4.859 | .035 | .139 ± .004 | .2383 | 4-7/8 | 5-1/8 | 1/8 |
| 1362 | 250 | 4.984 | .035 | .139 ± .004 | .2442 | 5 | 5-1/4 | 1/8 |
| 1363 | 251 | 5.109 | .035 | .139 ± .004 | .2502 | 5-1/8 | 5-3/8 | 1/8 |
| 1364 | 252 | 5.234 | .035 | .139 ± .004 | .2561 | 5-1/4 | 5-1/2 | 1/8 |
| 1365 | 253 | 5.359 | .035 | .139 ± .004 | .2621 | 5-3/8 | 5-5/8 | 1/8 |
| 1366 | 254 | 5.484 | .035 | .139 ± .004 | .2681 | 5-1/2 | 5-3/4 | 1/8 |
| 1367 | 255 | 5.609 | .035 | .139 ± .004 | .2740 | 5-5/8 | 5-7/8 | 1/8 |
| 1368 | 256 | 5.734 | .035 | .139 ± .004 | .2800 | 5-3/4 | 6 | 1/8 |
| 1369 | 257 | 5.859 | .035 | .139 ± .004 | .2859 | 5-7/8 | 6-1/8 | 1/8 |
| 1370 | 258 | 5.984 | .035 | .139 ± .004 | .2919 | 6 | 6-1/4 | 1/8 |
| 1371 | 259 | 6.234 | .040 | .139 ± .004 | .3038 | 6-1/4 | 6-1/2 | 1/8 |
| 1372 | 260 | 6.484 | .040 | .139 ± .004 | .3157 | 6-1/2 | 6-3/4 | 1/8 |
| 1373 | 261 | 6.734 | .040 | .139 ± .004 | .3276 | 6-3/4 | 7 | 1/8 |
| 1374 | 262 | 6.984 | .040 | .139 ± .004 | .3396 | 7 | 7-1/4 | 1/8 |
| 1375 | 263 | 7.234 | .045 | .139 ± .004 | .3515 | 7-1/4 | 7-1/2 | 1/8 |
| 1376 | 264 | 7.484 | .045 | .139 ± .004 | .3634 | 7-1/2 | 7-3/4 | 1/8 |
| 1377 | 265 | 7.734 | .045 | .139 ± .004 | .3753 | 7-3/4 | 8 | 1/8 |
| 1378 | 266 | 7.984 | .045 | .139 ± .004 | .3872 | 8 | 8-1/4 | 1/8 |
| 1379 | 267 | 8.234 | .050 | .139 ± .004 | .3992 | 8-1/4 | 8-1/2 | 1/8 |
| 1380 | 268 | 8.484 | .050 | .139 ± .004 | .4111 | 8-1/2 | 8-3/4 | 1/8 |
| 1381 | 269 | 8.734 | .050 | .139 ± .004 | .4230 | 8-3/4 | 9 | 1/8 |
| 1382 | 270 | 8.984 | .050 | .139 ± .004 | .4349 | 9 | 9-1/4 | 1/8 |
| 1383 | 271 | 9.234 | .055 | .139 ± .004 | .4468 | 9-1/4 | 9-1/2 | 1/8 |
| 1384 | 272 | 9.484 | .055 | .139 ± .004 | .4588 | 9-1/2 | 9-3/4 | 1/8 |
| 1385 | 273 | 9.734 | .055 | .139 ± .004 | .4707 | 9-3/4 | 10 | 1/8 |
| 1386 | 274 | 9.984 | .055 | .139 ± .004 | .4826 | 10 | 10-1/4 | 1/8 |
| 1387 | 275 | 10.484 | .055 | .139 ± .004 | .5064 | 10-1/2 | 10-3/4 | 1/8 |
| 1388 | 276 | 10.984 | .065 | .139 ± .004 | .5303 | 11 | 11-1/4 | 1/8 |
| 1389 | 277 | 11.484 | .065 | .139 ± .004 | .5541 | 11-1/2 | 11-3/4 | 1/8 |
| 1390 | 278 | 11.984 | .065 | .139 ± .004 | .5779 | 12 | 12-1/4 | 1/8 |
| 1391 | 279 | 12.984 | .065 | .139 ± .004 | .6256 | 13 | 13-1/4 | 1/8 |
| 1392 | 280 | 13.984 | .065 | .139 ± .004 | .6733 | 14 | 14-1/4 | 1/8 |
| 1393 | 281 | 14.984 | .065 | .139 ± .004 | .7210 | 15 | 15-1/4 | 1/8 |
| 1394 | 282 | 15.955 | .075 | .139 ± .004 | .7672 | 16 | 16-1/4 | 1/8 |
| 1395 | 283 | 16.955 | .080 | .139 ± .004 | .8149 | 17 | 17-1/4 | 1/8 |
| 1396 | 284 | 17.955 | .085 | .139 ± .004 | .8627 | 18 | 18-1/4 | 1/8 |
MATERIALS
Fluorosilicone Rubber
RT/Dygert Stock Material
Other Designations
Silastic® (Dow Corning), FMQ
Composition
Low density fluorinated silicone rubber
Temperature Range
-65 to 450 °F
Description
Fluorosilicone rubber is an inorganic "hybrid" elastomer which combines the wide temperature range spectrum of silicone with some of the chemical resistance of fluorocarbon rubber. Primary use is in fuel delivery systems. Fluorosilicone rubber offers the best low temperature properties of any oil resistant rubber. Like all compounds based on silicone rubber, fluorosilicones have relatively low tear strength, abrasion resistance, and tensile strength, and therefore, are generally not suited to dynamic applications.
Information above applies to the generic material. Specific compounds may exhibit different properties.
Physical Properties*
| Excellent | Good | Fair | Poor | |
| Abrasion resistance | • | |||
| Compression Set | • | |||
| Elongation | • | |||
| Flame resistance | • | |||
| Gas permeability | • | |||
| Low temperature flexibility | • | |||
| Tear resistance | • | |||
| Tensile strength | • |
Chemical Resistance*
| Excellent | Good | Fair | Poor | |
| Automotive refrigerants | • | |||
| Dilute acids | • | |||
| Dilute alkalis | • | |||
| Hydrocarbon fuels | • | |||
| Ketones | • | |||
| Ozone | • | |||
| Petroleum oils | • | |||
| Silicone Fluids | • | |||
| Steam | • | |||
| Water | • | |||
| Weather | • |
*Excellent, good, fair and poor are intended to serve as general guidelines only. Actual testing in the application environment is always recommended.
Information above applies to the generic material. Specific compounds may exhibit different properties.